Train-to-Ground TAP-6226 Series Moxa vietnam
Features & Benefits
- 2 dual-band radios, IEEE 802.11a/b/g compliant
- Railway approved IP68 housing
- Controller-based Turbo Roaming
- 2 fiber SFP ports and 4 PoE ports with M12 LAN connectors
- High transmission power for extended reach
- Complies with a portion of EN 50155 specifications
- -40 to 75°C operating temperature range
Introduction
The TAP-6226 trackside wireless unit is designed for board to ground wireless communication. It is a highly compact and rugged wireless unit that integrates two access points, a managed fiber switch, and a wide-range AC/DC power supply, all into one box. The IP68 housing allows the unit to withstand the harshest weather, and M12 connectors make the unit shock and vibration proof. The TAP-6226 supports advanced controller-based Turbo Roaming technology for applications such as Communication-Based Train Control (CBTC). The unit can
supply power to up to 4 PoE devices while providing reliable LAN communication with Moxa’s Turbo Chain technology.
Advanced Mobility and Reliability
• Controller-based L3 Turbo Roaming
• Mobile IP support
• 2 dual-band radios: 2.4 GHz and 5.1 to 5.9 GHz
• Turbo Chain support
• WPA/WPA2 and 802.11i support
• IEEE 802.1X/RADIUS support
Built for Transportation Applications
• Isolated 110 to 220 VDC/VAC power input
• High transmission power, 400 mW
• Supplies power through 4 PoE ports
• 2 fiber SFP ports for backbone installation
• Wide temperature (-40 to 75°C) and IP68 housing
White Paper:
The Four Most Useful Technologies for Train-to-Ground Communications
Wireless networks are easier to deploy than wired networks, but they can only be used for demanding industrial applications if they meet high reliability and bandwidth requirements. Today, however, wireless technologies are now mature enough to support critical industrial systems and intense applications such as video-over-wireless.This guidebook provide greater insight into the benefits Moxa can offer customers who would like to implement seamless video transmission over high bandwidth wireless networks.
• WLAN Interface | |
Standards | IEEE 802.11a/b/g for Wireless LAN IEEE 802.11i for Wireless Security IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseTX IEEE 802.3af for Power-over-Ethernet IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1p for Class of Service IEEE 802.1Q for VLAN |
Spread Spectrum and Modulation (typical) | • DSSS with DBPSK, DQPSK, CCK • OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 1 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps |
Operating Channels (central frequency) | US: 2.412 to 2.462 GHz (802.11a/b/g, 11 channels) 5.18 to 5.24 GHz (802.11a, 4 channels) 5.26 to 5.825 GHz (optional) EU: 2.412 to 2.472 GHz (802.11abg, 13 channels) 5.18 to 5.24 GHz (802.11a, 4 channels) 5.26 to 5.825 GHz (optional) *Special frequency bands (such as 5.9 GHz) is available for customization. |
Security | • SSID broadcast enable/disable • Firewall for MAC/IP/Protocol/Port-based filtering • 64-bit and 128-bit WEP encryption, WPA/WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP, and AES) |
Transmission Rates | 802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
TX Transmit Power | 802.11b: Typ. 26±1.5 dBm @ 1 to 11 Mbps 802.11g: Typ. 26±1.5 dBm @ 6 to 24 Mbps, Typ. 25±1.5 dBm @ 36 Mbps, Typ. 24±1.5 dBm @ 48 Mbps, Typ. 23±1.5 dBm @ 54 Mbps 802.11a: Typ. 26±1.5 dBm @ 6 to Mbps, Typ. 25±1.5 dBm @ 36Mbps, Typ. 24±1.5 dBm @ 48 Mbps, Typ. 23±1.5 dBm @ 54 Mbps |
RX Sensitivity | 802.11b: -97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90 dBm @ 11 Mbps 802.11g: -93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 12 Mbps, -88 dBm @ 18 Mbps, -84 dBm @ 24 Mbps, -80 dBm @ 36 Mbps, -76 dBm @ 48 Mbps, -74 dBm @ 54 Mbps 802.11a: -90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 12 Mbps, -85 dBm @ 18 Mbps, -83 dBm @ 24 Mbps, -79 dBm @ 36 Mbps, -75 dBm @ 48 Mbps, -74 dBm @ 54 Mbps |
• Protocol Support | |
General Protocols | Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP v1/v2/v3, PPPoE, DHCP, STP/RSTP |
• Interface | |
Connector for External Antennas | N-type (female) |
Fiber Ports | 2, 100BaseSFP slot |
Console Port | M12 A-coded 5-pin male connector |
LED Indicators | PWR1, PWR2, PoE1-4, FAULT, STATE, HEAD, TAIL, LAN1-6, WLAN1, WLAN2 |
Fast Ethernet ports | 4, side cabling, M12 D-coded 4-pin female connector, 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection, 802.1af PoE power budget |
Fiber Module | 100Base multi-mode 1300 nm wavelength with LC connector for 4 km transmission (50/125 µm or 62.5/125 µm 800 MHz-km @ 1300 nm wavelength) |
• Physical Characteristics | |
Housing | Metal, IP68 protection |
Weight | 9.7 kg (21.38 lb) |
Dimensions | 324 x 279 x 156 mm (12.76 x 10.98 x 6.14 in) |
Installation | Wall mounting |
• Environmental Limits | |
Operating Temperature | -40 to 75°C (-40 to 167°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5% to 95% (non-condensing) |
• Power Requirements | |
Input Voltage | 110/220 VDC/VAC |
Input Current | 0.68 A @ 110 VDC/VAC |
Connector | M23 |
Power Consumption | 74.8 W (max., with PoE ports fully loaded), 15 W (without PoE) |
Reverse Polarity Protection | Present |
Overload Current Protection | Present |
• Standards and Certifications | |
Safety | UL 60950-1, EN 60950-1 (CB) |
EMC | EN 55032/24, EN 61000-6-2/6-4 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 |
Radio | EN 301 489-1/17, EN 300 328, EN 301 893, FCC ID SLE-WAPA004 |
Rail Traffic | EN 50155*, EN45545-2, EN 50121-4 *Complies with a portion of EN 50155 specifications. |
• MTBF (mean time between failures) | |
Time | 382,735 hrs |
Standard | Telcordia SR332 |
• Warranty | |
Warranty Period | 5 years |
Details | www.anhnghison.com |