Single-Radio Wireless AP/Bridge/Client AWK-3191 Series Moxa vietnam
Features and Benefits .jpg)
- 900 MHz transmission for long distance wireless communication
- AP/client and master/slave modes supported for point-to-point and point-to-multi-point connections
- Maximum security with WEP/WPA/WPA2/802.11X and powerful filters
- Integrated antenna and power isolation
- -40 to 75°C operating temperature range (T models)
Introduction
.png)
The AWK-3191 900 MHz wireless AP/bridge/client is Moxa’s answer to long distance wireless communication for industrial applications. By combining the characteristics of the 33-centimeter band and the proven 802.11 standards, Moxa is able to provide a reliable long distance wireless solution. Unlike traditional point-to-point 900 MHz radios, the AWK-3191 supports both master/slave and AP/client operation modes to enable both point-to-point and point-to-multi-point communication for higher flexibility and lower total cost of ownership.
Furthermore, the AWK-3191 is designed to be deployed easily, but in case of external interference, Moxa also provides the ability to allow engineers to adjust their 900 MHz central frequency and bandwidth (5/10 MHz and 20 MHz) to optimize their wireless performance.
The AWK-3191 is rated to operate at temperatures ranging from -25 to 60°C for standard models and -40 to 75°C for wide temperature models, and with an industrial-oriented design, it is compliant with various standards and approvals, making it rugged enough for any harsh industrial environment.
Advanced Security
• Enable/disable SSID broadcasts
• WPA/WPA2 (Wi-Fi Protected Access) and 802.11i support
• IEEE 802.1X / RADIUS support
• MAC/IP/protocol/port filtering for applications that require more restricted access control
Specifications for Industrial-Grade Applications
• Long-distance data transmission over 30 km with directional antenna
• Power and isolation design for a complete separation between system ground, chase ground, and antenna system to protect against interference from unstable environmental factors
• Redundant DC power inputs
• Integrated DI/DO for on-site monitoring and warnings
• Signal strength LEDs for easy deployment and antenna alignment
Application Flyer:
900 MHz Solution for Long Distance Communication 
Deploying long distance communication is usually expensive for industrial applications that require a fast and reliable connection. Moxa’s AWK-3191 wireless AP/bridge/client not only eliminates the wiring expense, it also gives users field tested 900 MHz wireless communication at a 6 Mbps data rate over a distance of 30 km, providing an excellent alternative to expensive microwave radios. Download this application flyer to find out why the AWK-3191 is your best choice for providing seamless network transmission for long distance mining and oil & gas applications...more
White Paper:
.jpg){kind=small}
Expert Tips for Optimizing Industrial Wireless Networks
Compared with its popularity in everyday commercial environments, Wi-Fi has been slow to gain a foothold in industrial M2M applications. One of the main reasons that industrial customers are reluctant to move from wired to wireless is the problems associated with stability. Wireless transmission is NOT as reliable as wired transmission. However, by following certain best practices it is possible to set up a wireless network that will provide the level of reliability needed for M2M communication applications. In this whitepaper, we present eight expert tips that you can follow to optimize your wireless networks for industrial application environments...more
| • WLAN Interface | |
| Standards | IEEE 802.11i for Wireless Security IEEE 802.1Q for VLAN IEEE 802.3af for Power-over-Ethernet* |
| *Hardware Rev. 3.0.0 supports PoE; hardware Rev. 2.0.0 does not support PoE. | |
| Spread Spectrum and Modulation (typical) | • OFDM with BPSK, QPSK, 16QAM, 64QAM • 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps |
| Operating Channels (central frequency) | US: 902 to 928 MHz (ISM band) • 915 MHz (BW = 20 MHz) • 908.5, 915, 921.5 MHz (BW = 10 MHz) • 905.25, 908.5, 911.75, 915, 918.25, 921.5, 924.75 MHz (BW = 5 MHz) |
| Security | • SSID broadcast enable/disable • Firewall for MAC/IP/protocol/port-based filtering • 64-bit and 128-bit WEP encryption, WPA/WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP, and AES) |
| Transmission Rates | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| Transmitter Power | Typ. 24±1.5 dBm @ 6 to 24 Mbps Typ. 23±1.5 dBm @ 36 Mbps Typ. 22±1.5 dBm @ 48 Mbps Typ. 21±1.5 dBm @ 54 Mbps |
| Receiver Sensitivity | -90 dBm @ 6 Mbps -88 dBm @ 9 Mbps -87 dBm @ 12 Mbps -85 dBm @ 18 Mbps -81 dBm @ 24 Mbps -77 dBm @ 36 Mbps -73 dBm @ 48 Mbps -71 dBm @ 54 Mbps |
| Channel Band Width | US: 5 MHz, 10 MHz, 20 MHz |
| • Protocol Support | |
| General Protocols | Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, DHCP, VLAN, STP/RSTP |
| • Interface | |
| Default Antennas | N/A, antenna purchase seperately |
| Connector for External Antennas | RP-SMA (female), 500 V insulation |
| LAN Ports | 1, RJ45, 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| Console Port | RS-232 (RJ45-type) |
| Reset | Present |
| LED Indicators | PWR1, PWR2, PoE (discontinued starting with Rev. 2.0.0), FAULT, STATE, SIGNAL*, CLIENT MODE, BRIDGE MODE, WLAN, 10M, 100M |
| • *signal strength indicator | |
| Alarm Contact (digital output) | 1 relay output with current carrying capacity of 1 A @ 24 VDC |
| Digital Inputs | 2 electrically isolated inputs• +13 to +30 V for state “1” • +3 to -30 V for state “0” • Max. input current: 8 mA |
| • Management | |
| Device Management | Wireless Search Utility, SNMP |
| • Physical Characteristics | |
| Housing | Metal, IP30 protection |
| Weight | 930 g (2.05 lb) |
| Dimensions | 53 x 135 x 105 mm (2.08 x 5.31 x 4.13 in) |
| Installation | DIN-rail mounting (standard), wall mounting (optional) |
| • Environmental Limits | |
| Operating Temperature | Standard Models: -25 to 60°C (-13 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5% to 95% (non-condensing) |
| • Power Requirements | |
| Input Voltage | 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet* (IEEE 802.3af compliant) |
| *Support for PoE discontinued starting with hardware Rev. 2.0.0. | |
| Input Current | 0.49 A @ 12 VDC; 0.12 A @ 48 VDC |
| Connector | 10-pin removable terminal block, 500 V insulation |
| Power Consumption | 5.76 W |
| Reverse Polarity Protection | Present |
| • Standards and Certifications | |
| Safety | UL 60950-1 |
| EMI | CISPR 22, FCC Part 15B Class B |
| Radio | FCC ID SLE-WAFS001 |
| Note | Please check Moxa’s website for the most up-to-date certification status. |
| • MTBF (mean time between failures) | |
| Time | 484,469 hrs |
| Standard | Telcordia SR332 |
| • Warranty | |
| Warranty Period | 5 years |
| Details | www.anhnghison.com |
![Cables-CBL-M12[FF5P]-OPEN-100-IP67-Moxa-vietnam.jpg](/Images/products/thumb/Cables-CBL-M12[FF5P]-OPEN-100-IP67-Moxa-vietnam.jpg)
