Embedded Serial-to-Ethernet Modules MiiNePort E3 Series Moxa vietnam

Features and Benefits               MiiNePort embedded serial device servers

  • IEEE 802.3af compliant PoE pass-through
  • Use Moxa’s high quality and reliable second generation MiiNe SoC
  • Versatile choice of operation modes fulfill specific application requirements
  • Green design with extremely low power consumption
  • MiiNePort NetEZ Technology makes integration incredibly easy
  • Highly compact embedded device module



Moxa’s MiiNePort E3 series embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices with minimal integration effort. The MiiNePort E3 is empowered by the MiiNe, Moxa’s second generation SoC, which supports 10/100 Mbps Ethernet, up to 921.6 kbps serial baudrate, a versatile selection of ready-to-use operation modes, and requires only a small amount of power. By using Moxa’s innovative NetEZ technology, the MiiNePort E3 can be used to convert any device with a standard serial interface to an Ethernet enabled device in no time. In addition, the MiiNePort E3 is a compact embedded device server with an RJ45 connector, making it easy to fit into virtually any existing serial device.


The MiiNe—Moxa’s 2nd Generation SoC

The MiiNe was created to provide manufacturers with a competitive embedded serial-to-Ethernet solution. The MiiNePort E3, which uses the MiiNe for its SoC, is a compact embedded device server that has the lowest power consumption of similar products. The MiiNe has the following features:
     ‧Designed for serial-to-Ethernet applications
     ‧Uses an ARM core
     ‧Uses Moxa’s own advanced UART technology
     ‧2 MB Flash and 4 MB SDRAM memory built in




Pin Assignment

Form Factor
Type Pin header module
Dimensions 35 x 52.5 x 18 mm (1.38 x 2.07 x 0.71 in)
Weight 12 g (0.03 lb)
System Information
CPU 32-bit ARM Core
RAM 4 MB built in
Flash 2 MB built in
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector RJ45 (magnetic)
Magnetic Isolation Protection 1.5 kV built-in
LEDs 10BASE-T & 100BASE-TX Link Activity
PoE Pass-through 802.3af compliant
Serial Interface
Number of Ports 1
Transmission Format Standard TTL
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Baudrate MiiNePort E3: 50 bps to 230.4 kbps
MiiNePort E3-H: 50 bps to 921.6 kbps 
Note: Non-standard baudrates supported
Serial Signals
TTL TxD, RxD, RTS, CTS, DTR, DSR, DCD, RST (reset circuit), GND
Digital I/O Pins
GPIO 4 configurable I/O pins
Network Protocols ICMP, ARP, IPv4, TCP, UDP, DHCP, HTTP, SNMP V1, SMTP, TFTP, Auto IP, Telnet, BOOTP
Configuration Options Web Console, Serial Console (Serial Command Mode), Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers Linux 2.4.x, 2.6.x, 3.x
Operation Modes Real COM, TCP Server, TCP Client, UDP, Ethernet Modem, RFC2217
NetEZ Function EZPower, EZPage, SCM (Serial Command Mode), AutoCFG
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature (package included) -40 to 60°C (-40 to 140°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage 3.3 to 5 VDC
Input Current 157 mA @ 3.3 VDC
Standards and Certifications
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class B
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power 1 kV; Signal 0.5 kV
IEC 61000-4-5 Surge: Power 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11
Vibration IEC 60068-2-6, 5-25.7 Hz: ±15 mm; 25.7-500 Hz: 20g; 3 hours/axis
Shock IEC 60068-2-27, 500g/2ms
Drop IEC 60068-2-34IEC 60068-2-32, ISTA-2A
MTBF (mean time between failures) Time: 3,608,031 hrs
Standard: Telcordia (Bellcore) TR/SR
Warranty Period 5 years
Details www.anhnghison.com