Industrial-Network-Video-Recorder-MxNVR-MO4-Series-Moxa-vietnam.jpg

Industrial Network Video Recorder MxNVR-MO4 Series Moxa vietnam


Features and Benefits

  • Embedded system with low power consumption; no heater and fan required
  • Transmits and records the H.264 and MJPEG video streams simultaneously
  • One SATA interface for 2.5” hard disk or SSD (solid state disk)

  • Meets EN 61373 vibration criteria with a 2.5” inch hard disk installed*
  • Anti-vibration with built-in M12 Ethernet and power input connector, DB9 audio inputs, and DI/DO connector
  • T model is compliant with EN 50121-3-2 and a portion of EN 50155 specifications (T model supports TX temperature level with -40 to 75° operating temperature; SSD required)

  • DynaStream™ supported for optimized network efficiency
  • ONVIF comformity for standardization and interoperability
  • Supports DHCP OPT66/67 for auto-configuration
    * Hard disk must be purchased separately

 

 

 

Introduction

The MxNVR-MO4 is a streaming DVR (digital video recorder), which can transmit and record H.264 or MJPEG video streams simultaneously. With a rugged design that is compliant with the essential sections of EN 50155, covering power characteristics, EMC, vibration, shock and temperature (T model, TX temperature level), the MxNVR-MO4 especially excels in rolling stock IP video surveillance applications. Moreover, the MxNVR-MO4 has passed EN 61373 standard anti-vibration testing with a 2.5 inch hard disk (purchased separately), delivering highly reliable storage performance for rolling stock applications. The MxNVR-MO4 can be triggered to record by system boot, by event, by schedule, or by external commands, such as CGI or SNMP. The embedded DynaStream™ function increases the network transmission efficiency by dynamically adjusting the video frame rate. To prevent unauthorized access, advanced 802.1X authentication is available to provide high network security. The MxNVR-MO4 also supports the ONVIF standard to easily integrate and interoperate with third party systems and software.

Recording
Stream Types H.264 @ 120 FPS or MJPEG @ 60 FPS
Video File Format AVI
Record Modes continuous recording, schedule recording, event recording
Playback
Method Playback with popular media players (FFDShow codec required) or with customized software (programmed by SDK)
Video Download Remote download via FTP
Storage
Disk Interface 1 SATA interface for 2.5-inch hard disk or SSD (solid state disk)
Disk Tray Removable disk tray 
Note: The 2.5-inch hard disk and SSD need to be purchased and installed by the user.
Video
Video Compression H.264 (MPEG4 part 10, AVC), MJPEG
Video Inputs 4 BNC connectors (1Vpp, 75 ohms)
Video Outputs Via Ethernet
Video Streams H.264/ MJPEG dual streams
Video Resolution and FPS (frames per second)
Video Viewing • DynaStream™ supported for changing the video frame rate automatically
• Adjustable image size and quality
• Timestamp and text overlay
• Maximum of 8 simultaneous unicast connections
Audio
Audio Inputs 2, Line-in or MIC-in, DB9 connector
Audio Format Mono, PCM (G.711)
Network
Protocols TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, DHCP OPT66/67
Ethernet 1 10/100BaseT(X) isolated Ethernet port, M12 connector
Serial Port
Console Port 1, RS-232 isolated RJ45 port
GPIO
Digital Inputs 4, max. 8 mAHigh: +13 V to +30 V; Low: -30 V to +3 V
Relay Output 1, max. 24 VDC @ 1A
Connector isolated DB9
LED Indicators
STAT System status
Power Power on/off
FAULT Can be configured to correspond to disconnected network
V1, V2, V3, V4 1, 2, 3, 4 video inputs activity
HDD Storage disk status
10/100 10Mbps or 100Mbps
Power Requirements
Input Voltage 1, 12 VDC or 24 VDC input, 5-pin isolated M12 connector
Power Consumption Max. 11.5 W (with 1 2.5-inch HDD)
Physical Characteristics
Housing Metal
Dimensions 92.8 x 135 x 150.4 mm (3.93 x 5.31 x 5.35 in)
Installation Panel mounting or DIN-rail mounting
Alarms
Video Motion Detection Includes sensitivity settings
Video Loss Video loss alarm
Scheduling Daily repeat timing schedule
Imaging JPEG snapshots for pre/trigger/post alarm images
Video Recording Event recording to the hard disk (if installed)
Custom Alarms HTTP event servers and CGI events for setting customized alarm actions
Email/FTP Messaging Automatic transfer of stored images via email or FTP as event-triggered actions
Pre-alarm Buffer 16 MB video buffer for JPEG snapshot images
Security
Password User level password protection
Filtering By IP address
Authentication 802.1X
Environmental Limits
Operating Temperature Standard Model: 0 to 60°C (32 to 140°F)
Wide Temp. Model: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Conformal Coating Available on request
Standards and Certifications
Safety UL 60950-1
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN 61000-4-2 (ESD), Level 3; EN 61000-4-3 (RS), Level 3; EN 61000-4-4 (EFT), Level 3; EN 61000-4-5 (Surge), Level 3;
EN 61000-4-6 (CS), Level 3; EN 61000-4-8; EN 61000-4-11
Rolling Stock EN 50155* 
*Complies with a portion of EN 50155 specifications. Please contact Moxa or a Moxa distributor for details.
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration EN/IEC 61373 (with Toshiba 2.5-inch hard disk) 
Note: Please check Moxa’s website for the most up-to-date certification status.
Warranty
Warranty Period 5 years
Details www.anhnghison.com
Minimum Viewing System Requirements
CPU Pentium 4, 2.4 GHz
Memory 512 MB of memory
OS Windows XP/2000 with SP4 or above, Windows Vista, Windows 7
Browser Internet Explorer 9.x or above
Multimedia DirectX 9.0c or above
Software Development Kit
VPort SDK PLUS Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is vailable for download from Moxa’s website).
Standard ONVIF