Industrial DSL Ethernet Extender IEX-408E-2VDSL2 Series Moxa vietnam

 Features and Benefits 

  • VDSL2 high-speed long distance copper connections; up toIEX-408E ethernet extender switch
    300 m at 100 Mbps and up to 3 km at 1 Mbps over twisted-pair
    copper wires
  • Automatic CO/CPE negotiation reduces configuration time
  • Turbo Ring / Turbo Chain on both Fast Ethernet and VDSL2 ports for fast recovery
  • Controllable bypass mode on VDSL2 ports gives higher availability in a daisy chain topology
  • Flexible deployment with 2-pin or RJ11/45 connector on VDSL2 ports
  • Easy network management by web browser, Telnet/serial console, Windows utility, ABC-02, and MXview


The IEX-408E-2VDSL2 is an industrial managed Ethernet extender switch for establishing long distance Ethernet transmissions over twisted-pair copper wiring. This product can easily be linked in series to form a long distance multi-drop configuration, with one IEX-408E-2VDSL2 unit located at each drop-point. Adjacent drop points can be separated theoretically by up to 3 km, with a transmission speed of 1 Mbps achieved using a VDSL2 connection (with a connection distance of 300 m, a transmission speed of 100 Mbps can be theoretically achieved).


Each IEX-408E-2VDSL2 unit provides six 10/100BaseT(X) and two DSL ports, giving users an incredible amount of flexibility for linking together a wide variety of devices separated by vast distances. Ethernet redundancy is provided by Turbo Ring, Turbo Chain, RSTP/ STP, and MSTP, and a state-of-the-art controllable bypass solution on the DSL ports increases the system reliability and availability of your network. The IEX-408E-2VDSL2 series also supports advanced management and security features. It is the perfect solution for reducing the cost of establishing new network cable installations using existing twisted-pair copper wiring to extend copper cable networks beyond the conventional distance limitations imposed by the Ethernet protocol.


Take Today, Add Tomorrow

Worldwide References of the IEX Series Industrial Ethernet Extenders


As an alternative to investing in new cables for system upgrades, Moxa’s IEX Ethernet extenders provide users with greater flexibility for linking devices together over long distances using existing copper wiring. When costs need to be reduced, users can easily take the legacy system, and transform it into a modern network, while saving time and money. Read on to learn more details about worldwide user cases.........more




Is Your Network Infrastructure Ready for the IIoT?


The Industrial Internet of Things (IIoT) trend aims to improve efficiency and productivity by connecting different devices together as well as collecting and analyzing large volumes of data to offer accurate information. However, before reaping the benefits of the IIoT, users need to ensure that the correct infrastructure is in place. To make sure your network is ready for the IIoT, check out five of the most frequently mentioned questions........more


Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
ITU G.993.2 for very high speed digital subscriber line transceivers 2
Management SNMP v1/v2c/v3, LLDP, Syslog, RMON, DHCP Server/Client, DHCP Option 66/67/82, BootP. TFTP, SMTP, RARP, Telnet, SNMP Inform, Flow Control, Back Pressure Flow Control
Filter 802.1Q VLAN, Port-Based VLAN, GVRP, IGMP v1/v2/v3, GMRP
Redundancy Protocols STP, RSTP, MSTP, Turbo Ringv1/v2, Turbo Chain, Link Aggregation
Time Management SNTP, NTP Server/Client
Industrial Protocols EtherNet/IP, PROFINET IO, Modbus/TCP
MIB MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
DSL Port RJ11 (RJ45 connector) or detachable 2-contact terminal block
RJ45 Ports 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
Console Port USB-serial console (Type B connector)
LED Indicators PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (Fast Ethernet port), MSTR/HEAD, CPLR/TAIL, DSL BYPASS
Alarm Contact 1 relay output with current carrying capacity of 1 A @ 24 VDC
Storage Port USB storage port (Type A connector)
Button Reset button
Digital Inputs 1 input with the same ground, but electrically isolated from the electronics.• +13 to +30 V for state “1”
• -30 to +3 V for state “0”
• Max. input current: 8 mA
Switch Properties
MAC Table Size 16K
Packet Buffer Size 1.5 MB for Fast Ethernet side; 8 KB for DSL side
Priority Queues 4
Max. Number of Available VLANs 64
VLAN ID Range VID 1 to 4094
IGMP Groups 256
Physical Characteristics
Housing Metal, IP30 protection
Dimensions 74 x 111 x 135 mm (2.91 x 4.37 x 5.32 in)
Weight LV Models: 1.23 kg
HV Models 1.26 kg
Installation DIN-rail mounting, wall mounting (with optional kit)
Altitude Up to 2000 m
Note: Contact Moxa for products guaranteed to function at higher altitudes.
Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage LV Models: 12/24/48 VDC, redundant dual inputs
HV Models: 110/220 VDC/VAC
Operating Voltage LV Models: 9.6 to 60 VDC
HV Models: 88 to 300 VDC, 85 to 264 VAC
Input Current Max. 1 A @ 12 VDC
Max. 0.48 A @ 24 VDC
Max. 0.26 A @ 48 VDC
Max. 0.097 A/0.050 A @ 110/220 VDC
Max. 0.230 A/0.149 A @ 110/220 VAC
Connection 5-pin terminal block
Overload Current Protection Present
Reverse Polarity Protection Present
Standards and Certifications
Safety UL 61010-2-201, EN 60950-1 (LVD) (In plan)
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS EN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV
EN 61000-4-3 (RS): 80 MHz to 1 GHz: 10 V/m
EN 61000-4-4 (EFT): Power: 4 kV
EN 61000-4-5 (Surge): Power: 4 kV; Signal: 4 kV
EN 61000-4-6 (CS): 10 V
EN 61000-4-8
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Traffic Control NEMA TS2 (In plan)
Rail Traffic EN 50121-4 (In plan)
Vibration IEC 60068-2-6
MTBF (mean time between failures)
Time 782,910 hrs
Standard Telcordia (Bellcore), GB
Warranty Period 5 years