Ethernet-I-O-ioLogik-E1512-T-Moxa-vietnam.jpg

Ethernet I/O ioLogik E1512-T Moxa vietnam


 

  • User-definable Modbus/TCP Slave addressing
  • Active communications with MX-AOPC UA Server
  • Easy mass deployment and configuration with ioSearch utility
  • Friendly configuration via web browser
  • Simplify I/O management with MXIO library on either Windows or Linux platform
  • EN 50121-3-2, EN 50121-4, and EN 50155* approval for harsh railway environments
  • Wide operating temperature range: -40 to 85°C (-40 to 185°F)
    *Complies with a portion of EN 50155 specifications

Introduction

The ioLogik E1512 Ethernet Remote I/O product has a ruggedized aluminum housing, and is compliant with EN 50121-3-2, EN 50121-4 and essential sections of EN 50155 standard, both of which are essential for electronic equipment used in rolling stock applications. This rugged platform features a wide operating temperature range of -40 to 85°C to deliver consistent performance in harsh environment.

  

DI Channel Isolation Protection

Channel to channel isolation provides the most robust protection against electrical surges. With this topology, each DI channel on the ioLogik E1512 is individually isolated to ensure highly stable data communication. In cases of high surge events such as lighting strikes, the device is protected from current surge by this channel isolation feature. This is a critical requirement in railway applications when considering an Ethernet-based I/O solution.

 

Seamless SCADA Connectivity with Active OPC Technology

Moxa’s patented Active OPC Server is a software package that operates as an OPC driver for HMI and SCADA systems . The Active OPC server enables the ioLogik E1512 to actively communicate with the SCADA system  to provide instant I/O status.

 ioLogik E1512-T Specifications
Inputs and Outputs
Digital Inputs 4 channels (channel-to-channel isolation)
Configurable DIOs (by software) 4 channels
Isolation 3k VDC or 2k Vrms
Digital Input
Sensor Type Wet Contact (NPN or PNP), Dry Contact
I/O Mode DI or Event Counter
Dry Contact • On: short to GND
• Off: open
Wet Contact (DI to GND) • On: 0 to 3 VDC
• Off: 10 to 30 VDC
Common Type 2 points per COM (Configurable DIOs)
Counter Frequency 250 Hz
Digital Filtering Time Interval Software configurable
Digital Output
Type Sink
I/O Mode DO or Pulse Output
Pulse Output Frequency 500 Hz
Over-Voltage Protection 45 VDC
Over-Current Protection 2.6 A (4 channels @ 650 mA)
Over-Temperature Shutdown 175°C (typical), 150°C (min.)
Current Rating 200 mA per channel
MTBF (mean time between failures)
Time 554,122 hrs
Standard Telcordia SR332
Common Specifications
LAN
Ethernet 1 10/100 Mbps, M12
Protection 1.5 kV magnetic isolation
Protocols Modbus/TCP (slave), TCP/IP, UDP, DHCP, BOOTP, HTTP
Power Requirements
Input Voltage 12 to 48 VDC
Input Current 150 mA @ 24 VDC
Note Compliant with EN 50155 at 24 VDC
Physical Characteristics
Wiring I/O cable max. 14 AWG
Dimensions 144 x 124 x 30 mm (5.67 x 4.88 x 1.18 in)
Weight Under 825 g (1.82 lb)
Mounting DIN-rail (standard), wall (with optional kit)
Environmental Limits
Operating Temperature -40 to 85°C (-40 to 185°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
Altitude Up to 2000 m
Note: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
Conformal Coating Applies only to -CT models
Standards and Certifications
Safety UL 508
EMC EN 61000-6-2/6-4
EMI FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS:
80 MHz to 1 GHz: 10 V/m
1.4 GHz to 2 GHz: 3 V/m
2 GHz to 2.7 GHz: 1 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS:
Rail Traffic EN 50155*, EN 50121-4
*Complies with a portion of EN 50155 specifications.
Green Product RoHS, CRoHS, WEEE
Note: Please check Moxa’s website for the most up-to-date certification status.
Warranty
Warranty Period 5 years
Details www.anhnghison.com